This small but powerful LED control unit can power up to 12pcs 2.0 Watt LED lights (strips, oval lights, drl lights). It comes with 10 strobe effects easily selectable by pressing the on/off button on the unit. Holding the on/off button for 2 seconds, turns the unit off. The RED LEDs on the front of the control unit indicate the type of strobe effect and the side on which it occurs.
SPECIFICATIONS:
- Input Voltage: 12-24V DC
- Output Power: 24W MAX
- Operating Temperature: -40C to +50C
- Material: ABS Plastic
- MODE button: cycles through strobe patterns. Last chosen pattern stays selected.
- Power ON/OFF: hold the MODE button depressed for 2 seconds
- Water Resistant: NO
DIMENSIONS:
- Control Box: 4.6cm L x 2.8cm W x 1.4cm H
- Wire Length: Power Wire (+/-) 120cm, Light Wires 300cm
INSTALLATION:
- Install close to the driver where the control box can be easily accessed
- Connect LED lights directly to the unit, keeping in mind the 25W max cummulative wattage
- INPUT WIRES: Red is the positive (+), and black is the negative (-). Connect these to constant or ACC power depending on your needs.
- OUTPUT WIRES: Black wire with a white line is the positive (+), Black wire is the negative (-), Left and Right sides
- Installation: use a 3M two sided tape to attach the unit to the vehicle's interior
VIDEO LINK:
