Super small H4 (9003, HB2) U9 LED bulbs are definitely up there in brightness with the X9 and X9S LED kits.
Features:
- LED Chip: 18pcs FLIP Chip per bulb
- Low beam: 12pcs LED ON per bulb
- High beam: 18pcs LED ON per bulb
- Beam angle: 360°
- Power/Lumen: 100W 16000lm/set
- Measured Power: 3.8A@14V per bulb
- Input voltage: 12-24V
- Water Proof: IP68
- Material: Aluminum alloy
- Beam Angle: 360°
- Working temperature: -45°C to 105°C
- Color: 6000K(White)
- Driver: external
- Heat Sink: Turbo Fan
- Life-span: >30,000hrs
- Built In EMC: Yes
- Warranty: 1 Year
- Plug-n-play: Yes
- Adjustable LED location: Yes
- Canbus: Yes
Dimensions:
Total bulb length: 7.5cm
Bulb length inside the headlight: 4.5cm
Fan diameter: 3.2cm
Bulb diameter at the top: 0.6cm x 1.5cm
Space needed for the bulb's fan at the back of the headlight: 2.9cm
LED driver size: 4.97cm L x 2.9cm W x 1.3cm H
Successfully Installed in:
- 2016 TOYOTA TUNDRA CREWMAX 1794 EDITION
- 2014 Honda FUIT
- 2013 Honda CRV
Installation Directions:
1. Disconnect the H4 headlight power connector from the halogen bulb
2. Remove the rubber boot
3. Unclicp the wire spring clip, and remove the halogen bulb
4. Remove the bulb ring from the LED bulb and install it in the headlight, securing it with the wire spring clip
5. Re-install the rubber boot. At times, the length of the rubber boot needs to be trimmed around the center, if you have difficulty feeding the bulb into it.
6. Feed the LED bulb in through the rubber boot into the bulb ring
7. Align the bulb so the power wire on the bottom of the fan is poting down to 6 o'clock
8. Connect the H4 headlight power connector to the LED drive
9. Turn the headlights ON, to test the connection. Test high and low beam functionality.
