GT series LED is the latest in LED headlight bulb design, offering superior 18000lm brightness in each LED kit. Bulbs are cooled by super efficient cooling fan, have an adjustable beam, and an external LED driver.
Kit includes: 2 LED bulbs, 2 LED drivers, 2pcs zip ties, and 2pcs 3M self adhesive pads for led driver mounting.
SPECIFICATIONS:
- 360 degree light source - LED chips on both sides of the bulb light up when lights are ON
- Cooling: high speed fan
- LED: 4pcs CREE XHP70
- L/H Brightness: 9000lm per bulb, 18000lm per kit
- Power Draw: H/L 4.0 Amps@12V (48W actual power)
- 6V DRL Compatible: NO
- Minimum operating voltage: 6.5V
- Voltage: DC 9-32V
- Color: 6500K
- Lifespan: 30,000hrs
- Waterproof rating: IP65
- CAN-BUS: NO
- Adjustable beam: YES
DIMENSIONS:
Total bulb length: 8.8cm
Cooling diameter: 4.7cm
Space needed behind the headlight: 3.2cm
LED driver size: 6.4cm L x 4.1cm W x 1.8cm H
INSTALLATION:
To install these bulbs in headlights, you must first remove the old halogen bulb. Once removed, slide the H4 ring off the LED bulb and install it in the headlight, securing it with a clip. Re-install the rubber dust cap on the back of the headlight opening. Push the new LED H4 bulb through the dust cap into the headlight. Please ensure that the bulb's LED chips are facing to the sides of the headlight (fender and grille). The metal cups under the low beam LEDs should be open upward (12 o'clock). Low beam LEDs are the ones closest to the front of the LED bulb. If you need to adjust the position of the LEDs, you can do so by simply rotating the bulb in the headlight. You will hear faint snap every time the ball bearing snaps into an adjusting hole on the bulb. Once the LED chips are aligned, connect the LED driver to the bulb and then to the OEM light connector on the vehicle. Refer to the included instruction manual if you need more detail.