These are the latest in LED headlight kit series. The bulb body is quite small and it uses the newest G-XP LED chips.
Kit includes: 2pcs H13 X9S LED bulbs with LED drivers
Features:
- 360 degree light: YES
- 2 sided bulb design: YES
- High and Low beam : YES
- Canbus: YES
- Adjustable beam: YES
- External LED driver
- Output: H/L 10000lm per bulb, H/L 20000lm per kit
- LED CHIPS: 12pcs G-XP w/120lm per watt
- Power: 55W per bulb, 110W per kit
- Actual Power Draw: 3.8A@12V (45.6W) per bulb
- Voltage: DC 9-32V (12V or 24V systems)
- 6V DRL: NO (lowest operating voltage is 8.0V)
- Color: 6500K
- Lifespan: 30,000hrs
- Rating: IP65
- Bulb body material: aviation aluminum
- Working temperature: -40C to +80C
Dimensions:
Total bulb length: 7.3cm
Bulb Fan diameter: 3.7cm
Space needed for the bulb's fan at the back of the headlight: 2.7cm
LED driver size: 4.6cm (L) x 2.8cm (W) x 1.4cm (H)
Cable length: 27cm
Installation:
Low beam LEDs are the ones closest to the front of the LED bulb. When installing this bulb, ensure that LED chips are facing to the sides of the headlight, one side towards the fender and the other towards the grille. Also make sure that the low beam LEDs are on top, and high beam leds are on the bottom when in headlight. This is done by default, but check visually anyways. To install the OEM retaining ring, you will have to remove the black ring on the bulb, slide the OEM retaining ring onto the bulb, then slide the bulb's black ring back on, secure it with a screw, and then install the whole assembly in the headlight.
NOTE: 2014 F150 Ford trucks need anti-flicker decoders.