These H7 i7 1:1 fan cooled LED bulbs are the perfect plug-n-play fit for any vehicle using an H7 bulb type. No adapters are required because the bulbs fit the same as H7 halogen bulbs. Directly plugs into your existing headlight power connector. No extra LED drivers to worry about. No extra wires. High or Low beam in a single bulb.
Kit includes: 2x LED bulbs
FEATURES:
- Heat created by the LED diodes is kept in the headlight and not expelled out the back like most LED bulbs do
Heat Generation Data: Halogen H7 heats up to 238C while the H7 LED heats up to 91C at the top of the bulb
After running the LED bulb in a headlight for 15 minutes the lens temperature increased by 10C - LED chips on both sides of the bulb are ON providing 360 degree light source
- Adjustable beam: Yes - 2 positions - vertical or horizontal LED alignment
- Power: 25W per bulb, 50W per kit
- Power draw: 1.9A@12V (halogen bulb draws 3.87A@12V)
- Output: 4000lm per bulb, 8000lm per kit
- LED CHIPS: 6pcs, 3pcs per side
- LED type: ETI 5530 ZESII
- LED Color Temperature: 6000K
- H7 Halogen Brightness Measurement: 331 LUX
- H7 LED Brightness Measurement: 1519 LUX - 4.5x brighter than an H7 halogen bulb
- Voltage: DC 9V-32V
- Polarity: No
- 6V DRL compatible: No (lowest operating voltage is 8.5V)
- Built-in canbus: Yes
- EMC radio interference cancellation: Yes
- Dodge/Chrysler/KIA/Hyundai need LED Decoders: Yes
- Lifespan: 50,000+hrs
- Rating: IP67
- Working temperature: -45C to +85C
- Cooling: fan cooled. Fan is located in the top part of the bulb.
DIMENSIONS:
Bulb length: 5.6cm
Bulb length inside headlight: 4.6cm
Bulb diameter at top: 1.6cm
Base diameter: 3.4cm
Space needed behind the headlight: 0.4cm
SUCCESSFULLY INSTALLED IN:
- 2010 BMW R1200 GS motorbike low and high beam
- 2011 Hyundai SantaFe - high beam, no adapters are needed
- 2011 VW Golf - low beam
- 2017 VW Jetta. H7 anti-flicker decoders were not needed.
NOT SUITABLE FOR:
- 2015 VW Passat - high beam - flicker a few times on startup
2 Reviews Hide Reviews Show Reviews
-
Dark spot in center of vision
Installed these to replace my stock halogens in my 2007 Mazda 5 projector low beams, they both have less visible brightness and throw then the stock halogens from 2007. They also create a dark spot in the center of the beam creating a difficult experience driving at night. HVC REPLY: The shadow spot is likely caused by the bulb fan which is mounted at the top of the bulb. For projector headlamps we'd suggest using the H7 V22 LED series which has the smallest shadow profile. The LED diode location on the H7 i8 is identical to the H7 halogen bulb, so the reflection should be exactly in the same spot for both H7 led and halogen bulbs. The projected brightness could be affected by the installation of the H7 bulb, as each bulb can be installed with led diodes pointing up/down (incorrect) or left/right (correct installation). Please check the install.
-
Way Better Than Stock
Helps find Moose
