The H11 R8 Pro LED kits are a new arrival for 2023. They feature plug-n-play installation, canbus compatibility, full beam adjustment, built-in noise cancellation, and 24000lm light output and 120W per set.
Features:
- LED Chip: Flip Chip
- Beam angle: 360°
- Power/Lumen: 120W 24000lm per set / 60W 12000lm per bulb
- Measured Power: 5.0A@12V per bulb
- Input voltage: 12-24V
- MIN voltage to produce light is: 7.5V (OK for DRLs with 8+V)
- Water Proof: IP68
- Material: Aluminum alloy
- Beam Angle: 360°
- Working temperature: -45°C to 105°C
- Color: 6000K(White)
- Driver: external
- Heat Sink: Turbo Fan
- Life-span: >30,000hrs
- Built In EMC: Yes
- Warranty: 1 Year
- Plug-n-play: Yes
- Adjustable LED location: Yes
- Canbus: Yes
Technical Info:
People often ask if H8, H9 and H11 are the same or different. They fit the same but they vary by the wattage and light output in their HALOGEN form. An H11 halogen bulb has a 55W filament optimized for long life at the expense of lower light output. H11 55W is most often used in a low beam position. An H9 halogen bulb has a 65W filament optimized for maximum light output at the expense of shorter lifespan. H9 is most often used in a high beam position. H8 halogen bulb has a 35W filament with a much lower light output that the H9 and H11 bulbs. H8 fits the same as H9 and H11 but the bulb tabs are thinner than those of an H11 bulb and may need to be adjusted for an LED bulb to fit the headlight. H8 is normally used in fog lamps.
When upgrading to LEDs, if you match the power draw between the halogen and the LED, then you will have less issues with lights shutting off or needing canbus decoders.
- Low beam H11 55W halogen bulbs draw 4.10A@12V - the H11 R8 Pro draws 0.9Amp more which is acceptable at 5.0A@12V
Dimensions:
Total bulb length: 7.5cm
Fan diameter: 3.6cm
Bulb width at the top: 1.4cm
Space needed for the bulb's fan at the back of the headlight: 2.6cm
LED driver size: 5.4cm L x 3.1cm W x 1.5cm H
