Solves hyper blinking after installing LED bulbs in signal lights. Use these resistors with LED bulbs which have a power draw of less than 2.5 Amps. One side of the resistor splices into + and the other to - power wires leading to the signal light bulb. Resistors get very hot, so they should be installed on metal surface.
Specifications:
- Power: 50W
- Resistance: 6 Ohm
- Max current flow: 2.5 Amps
- Quantity: 1pc
- One resistor adds 1.7 Amps of power draw
1 year
