9005/9006/H10/9012 HID wiring relay harness

£17.94
(2 reviews) Write a Review
SKU:
SKU-249
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

40 Amp relay provides direct battery power connection for 9005, 9006, H10, 9012 single HID or LED bulb kits. It is intended for vehicles with low or high beam daytime running lights (DRL) needing full power instead of low voltage DRL power. Can also be used with H1, H7, H11 bulb types if input wires are modified. PLEASE SPECIFY WHICH CONNECTION YOU NED AT THE TIME OF ORDERING. H1 & H7 will be bare connectors, H11 will be an H11 plug. 

SPECIFICATIONS:

  • AWG 9 - red battery "+" wire
  • AWG 10 - all other wires
  • Wire type: copper
  • Wire diameter: 2.6mm
  • Relay head: 40Amp
  • Fuse: 30Amp
  • Trigger is a 9006/9006/9012/H10 plug-n-play connector which connects to the vehicle's OE headlight plug
  • Relay output are 2pcs of oval 9005/9006/9012/H10 connectors which connect to HID ballasts
  • Single lead with a fuse connects to a battery (+)
  • Chassis ground (-) wires are on output connectors

NOTE:
There are 2 types of flickering which may affect HIDs and LEDs.

  1. The first is an HID flicker caused by lack of power to HID ballasts. Any voltage below 12V will cause the igniter in the ballast to turn on/off in its attempts to ignite the HID bulb. To resolve this type of flicker, install the relay. The relay will supply full voltage to the ballast directly from the battery and the igniter in the ballast will be able to turn on the HID bulb.
  2. The second type of flickering is one caused by pulse width modulation (PWM) and daytime running lights (DRL). If this is the type of flickering you're experiencing then the relay alone will not be enough to get rid of the flicker. To stop the PWM and DRL flickering, you will need to add a plug-n-play capacitor or decoder just before the relay trigger plug. The minimum voltage for most LED kits to turn ON is 8V. However, there are some LED kits specifically designed to work at 6V. The minimum voltage for HID kits is 12V. 

 

1 year

2 Reviews Hide Reviews Show Reviews

  • 5
    9012 Relay Harness

    Posted by Bob M. on 10th Mar 2022

    works just as described , Martin was most informative and very up to date on all modern working of new systems designs and how they work

  • 5
    Just what i needed!

    Posted by Unknown on 14th Nov 2016

    Awesome quality! HID's work perfectly now after installing these!