LED Installation Guide for 2001-2022 Dodge RAM trucks
|
| YEAR |
DODGE RAM SERIES |
LED KIT SERIES AND OTHER RECOMMENDATIONS INCLUDING RESISTORS, RELAYS, AND CANBUS ANTI-FLICKER DECODERS FOR YOUR DODGE RAM. |
| 2001 DODGE RAM LED |
2 H/L |
9004 H/L headlight series. Any 9004 LED kit will work + canbus anti-flicker decoders |
| |
4 H/L |
9007 Low beam. Any 9007 LED kit will work + canbus anti-flicker decoders
9004 High beam. Any 9004 LED kit will work + canbus anti-flicker decoders |
| |
ALL |
8xx FOG series. Any 880 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2002 DODGE RAM LED |
1500 |
9007 H/L headlight series. Any 9007 LED kit will work + canbus anti-flicker decoders |
| |
1500 |
9006 FOG series. Any LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
2500-3500 |
9004 H/L headlight series. Any 9004 LED kit will work + canbus anti-flicker decoders |
| |
2500-3500 |
8xx FOG series. Any 880 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2003 DODGE RAM LED |
ALL |
9007 H/L headlight series. Any 9007 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series - any LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2004 DODGE RAM LED |
ALL |
9007 H/L headlight series. Any 9007 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2005 DODGE RAM LED |
ALL |
9007 H/L headlight series. Any 9007 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2006 DODGE RAM LED |
ALL |
H13 H/L headlight series. Any H13 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2007 DODGE RAM LED |
ALL |
H13 H/L headlight series. Any H13 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2008 DODGE RAM LED |
ALL |
H13 H/L headlight series. Any H13 LED kit will work + canbus anti-flicker decoders + 50W resistors (optional - to be used with lower wattage LED bulbs, <55W) |
| |
ALL |
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| QUAD HEADLIGHTS WITH DUST CAPS INTRODUCED |
| 2009 DODGE RAM LED |
 |
H13 H/L headlight series. Any H13 LED kit will work + canbus anti-flicker decoders
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
 |
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2010 DODGE RAM LED |
|
H13 H/L headlight series. Any H13 LED kit will work + canbus anti-flicker decoders
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders // 2010 RAM 3500 does not need anti-flicker decoders.
9005 High beam. 9005 Q3 or U9 will work and fit under the dust cap. No decoders are needed.
H10 (9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| CANBUS ANTI-FLICKER DECODERS NOT NEEDED |
| 2011 DODGE RAM LED |
|
H13 H/L headlight series. Any H13 LED kit will work. Canbus anti-flicker decoders are not needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap. Canbus anti-flicker decoders are not needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2012 DODGE RAM LED |
|
H13 H/L headlight series. Any H13 LED kit will work. H13 canbus anti-flicker decoders are needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap. H11 canbus anti-flicker decoders are needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
INTRODUCTION OF PROJECTOR & NON-PROJECTOR HEADLIGHTS WITH DUST CAPS
Low beam has lots of room inside the headlight. High beam is very tight and can fit only Q3 LED series. |
| 2013 DODGE RAM LED |
 |
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
 |
9012 Low beam. ONLY 9012 Q3 and 9012 U9 will work and fit under the dust cap.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed, EXCEPT for LONGHORN which does need the decoders.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2014 DODGE RAM LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
9012 Low beam. ONLY 9012 Q3 and 9012 U9 will work and fit under the dust cap. No decoders are needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed, EXCEPT for LONGHORN which does need the decoders.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2015 IS THE MOST PROBLEMATIC YEAR FOR AFTER-MARKET LED & HID INSTALLATIONS IN DODGE RAM |
| 2015 DODGE RAM LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
INSTALLATION CAUTION - an H11 relay may be needed if low beams keep shutting off even after decoders are installed. Relay power trigger should be set to side marker lights.
|
| |
|
9012 Low beam. ONLY 9012 Q3 and 9012 U9 will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
INSTALLATION CAUTION - 9012 Relay may be needed if low beams keep shutting off even after decoders are installed. Relay power trigger should be set to side marker lights.
|
| 2016 DODGE RAM LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3, or 9005 U9 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
9005 Low beam. 9005 U9 LED kit fits perfectly under the dust cap. 9005 X9S and 9005 F6 Series will NOT fit under the dust cap. No decoders were needed with the 9005 U9 series
9005 High beam. ONLY 9005 Q3, or 9005 U9 will work and fit under the dust cap. No decoders are needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2017 DODGE RAM LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
9005 Low beam. ONLY 9005 Q3 will work and fit under the dust cap + 9005 anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2018 DODGE RAM LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
H10 (9005, 9145) FOG series. Any H10 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| |
|
9005 Low beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
9006 FOG series. Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed. |
| 2019 DODGE RAM CLASSIC LED |
|
H11 Low beam. Any H11 LED kit will work and fit under the dust cap + canbus anti-flicker decoders
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap + canbus anti-flicker decoders
VERTICAL FOGS - Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
HORIZONTAL FOGS - H10 (9005, 9145) OR H11. Remove the halogen bulb and check the number on it. Any H10 or H11 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
|
| |
|
9005 Low beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
VERTICAL FOGS - Any 9006 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
HORIZONTAL FOGS - H10 (9005, 9145) OR H11. Remove the halogen bulb and check the number on it. Any H10 or H11 LED kit will work but fanless LED kits are recommended for fogs. No decoders are needed.
|
| 2020 DODGE RAM LED |
 |
H11 Low beam - Q3 only for RAM 3500, RAM 1500 fits these -> X9S, Q7, U9, Series LED will work and fit under the dust cap. No decoders are needed.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. No decoders are needed.
HORIZONTAL FOGS - H11 Fanless LED kits are recommended for fogs. No decoders are needed.
|
| 2021 DODGE RAM LED |
|
H11 Low beam. H11 F3S Pro are the brightest and fit under the dust caps. The F6 and U9 series worked initially but eventually shut off even with decoders.
9005 High beam. ONLY 9005 Q3 will work and fit under the dust cap. Decoders are needed.
HORIZONTAL FOGS - H11 Fanless LED kits are recommended for fogs. No decoders are needed.
|
| 2022 DODGE RAM LED |
|
H11 Low beam. H11 F3S Pro are the brightest and fit directly under the dust caps. The GTS Pro LEDs draw a few more amps than the halogen bulbs, so the canbus decoders are not needed. H55 draws nearly the same as the halogens so you also don't need them. However, using any other LED kits with much lesser power draw than that of the halogens will require the use of H11 canbus decoders.
9005 High beam. 9005 F5, Q3, or V10 LED Series fit and work well in the high beams without decoders.
|
| |
 |
9005 low beam. 9005 Q3 and 9005 U9 will fit under the dust cap. 9005 high beam - 9005 Q3 is suggested due to space limitations inside the headlight.
|
